Cookie Img Back to top
    Home » Products » Polyester Systems » Marmomastic Gel

    Marmomastic Gel

    Marmomastic Gel
    Marmomastic Gel
    Product Code : 01
    Product Description

    Technical Details

    Properties Results
    Colour Colourless, clear
    Hardner Methyl Ethyl Ketone Peroxide
    Complete Drying Time 24 Hours
    Gel Time 4 - 5 Minutes
    Stackability 10 - 30 Minutes
    Workability 24 Hours


    By using the Marmomastic Gel, there are following stone adhesive advantages.

    • Used for bonding
    • Fast Hardenning
    • Highly polishable
    • Ease of dosing and mixing
    • Usable at high temperature
    • Water resistant
    • Petrol and Oil resistant
    • Good Adhesive of Natural Stone

    Areas of Application

    As a renowned Stone Adhesive Marmomastic Gel is being applied at different areas and stones.

    • Natural Stones
    • Artificial Stones
    • Building Material
    • Travertine
    • Marble


    Surface Preparation

    • Surface should be free from dirt, debris, efflorescence and other loose particles.
    • Surface should be cleaned and slightly roughened
    • Dry the surface before using adhesive.
    • The adhesive can not be used on wet or damp surfaces as it doesn't allow the surface to dry completely.

    Mixture Preparations

    • Empty 100 grams of Part - A to every 2-4 grams of Part B in a clean container.
    • Stir well to mix completly to get a neuteral colour glueing adhesive.
    • Please Note :
    • Mixture once prepared has to be used immediately within 20-30 minutes
    • Maintain a temperature of 25°C while working with Marmomastic gel.


    • Once the patch test is fine, pour the contents on the suface to make the surface hard. Strike excess material to get a smooth surface.
    • Use standard techniques to work with the adhesive.
    • Wait for 6 - 8 hours after the application to achieve desired bond.
    • Maximum hardenning will be achieved only after 7 days of the application.
    • Try and keep the surface warm as it expedites the hardenning process, whereas, cold temperature retards the process.


    • Stability of the bond is highly dependent on the nature of the natural stone to be bonded.
    • Close container tightly when not in use and do not store the unused material.
    • Patch test recommended. Before applying on a large surface, check product performance on a smaller patch